|
72 | CRUX-ARM | ports/efikamx-arm | Bug Report | Low | efikamx devices | Closed | |
Task Description
Current libgmp version 5.0.5 fails with assembler error.
The problem is located on upstream Pkgfile which forces the build for i686.
[...]
tmp-add_n.s: Assembler messages:
tmp-add_n.s:79: Error: bad instruction `xor %edx,%edx’ [...]
From the original Pkgfile, it specifies:
–build=i686-pc-linux-gnu
Solution:
- Use current build vars for both ABI’s:
- softfp: –build=arm-unknown-linux-gnueabi
|
|
29 | CRUX-ARM | ports/opt-arm | Bug Report | Low | nmap: footprint mismatch found | Closed | |
Task Description
======⇒ ERROR: Footprint mismatch found:
MISSING -rwxr-xr-x root/root usr/bin/nmap-update
MISSING -rw-r–r– root/root usr/man/man1/nmap-update.1.gz
======⇒ ERROR: Building '/pub/pkg/contrib/nmap#6.00-1.pkg.tar.xz' failed.
checking svn_client.h usability... no
checking svn_client.h presence... no
checking for svn_client.h... no
checking subversion-1/svn_client.h usability... no
checking subversion-1/svn_client.h presence... no
checking for subversion-1/svn_client.h... no
configure: WARNING: Not building nmap-update because libsvn1 was not found
IMHO, we should wait until upstream decission
|
|
74 | CRUX-ARM | ports/opt-arm | Bug Report | Medium | firefox: (efikamx) 39.0-2 - gcc Illegal instruction fai ... | Closed | |
Task Description
Currently with default efikamx rootfs i get an illegal instruction fail (efikamx smartbook):
prt-get depinst firefox.. (full log at http://pastebin.com/LYFwgjDA )
....
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/netwerk/dns’ make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/toolkit/devtools/security’ Unified_cpp_devtools_security0.o
libtoolkit_devtools_security.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/toolkit/devtools/security’ make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/widget’ nsBaseWidget.o
Unified_cpp_widget0.o
liburiloader_prefetch.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/uriloader/prefetch’ Unified_cpp_widget1.o
Unified_cpp_widget2.o
make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/editor/libeditor’ Unified_cpp_editor_libeditor0.o
Unified_cpp_editor_libeditor1.o
Unified_cpp_editor_libeditor2.o
libwidget.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/widget’ In file included from /usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/editor/libeditor/Unified_cpp_editor_libeditor1.cpp:11:0:
/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/libeditor/nsEditor.cpp: In member function ‘nsresult nsEditor::JoinNodes(nsINode&, nsINode&)’:
/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/libeditor/nsEditor.cpp:1507:10: warning: ‘result’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return result;
^
make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/dom/battery’ BatteryManager.o
libdom_battery.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/dom/battery’ make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/security/manager/boot/src’ Unified_cpp_manager_boot_src0.o
libsecurity_manager_boot_src.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/security/manager/boot/src’ make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/dom/mathml’ Unified_cpp_dom_mathml0.o
libdom_mathml.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/dom/mathml’ make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/intl/uconv’ Unified_c_intl_uconv0.o
Unified_cpp_intl_uconv0.o
Unified_cpp_intl_uconv1.o
Unified_cpp_intl_uconv2.o
Unified_cpp_intl_uconv3.o
Unified_cpp_intl_uconv4.o
Unified_cpp_intl_uconv5.o
Unified_cpp_intl_uconv6.o
libintl_uconv.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/intl/uconv’ make[5]: Entering directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/accessible/base’ Unified_cpp_accessible_base0.o
Unified_cpp_accessible_base1.o
In file included from /usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/editor/libeditor/Unified_cpp_editor_libeditor1.cpp:110:0:
/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/libeditor/nsHTMLEditor.cpp: In member function ‘virtual nsresult nsHTMLEditor::BeginningOfDocument()’:
/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/libeditor/nsHTMLEditor.cpp:579:48: warning: ‘selOffset’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return selection->Collapse(selNode, selOffset);
^
In file included from /usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/editor/libeditor/Unified_cpp_editor_libeditor1.cpp:137:0:
/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/libeditor/nsHTMLInlineTableEditor.cpp: At global scope:
/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/libeditor/nsHTMLInlineTableEditor.cpp:271:1: internal compiler error: Illegal instruction
}
^
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
In the directory /usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/editor/libeditor
The following command failed to execute properly:
c++ -o Unified_cpp_editor_libeditor1.o -c -I../../dist/stl_wrappers -I../../dist/system_wrappers -include /usr/ports/opt-arm/firefox/work/src/mozilla-release/config/gcc_hidden.h -DSTATIC_EXPORTABLE_JS_API -DMOZILLA_INTERNAL_API -DIMPL_LIBXUL -DMOZ_GLUE_IN_PROGRAM -DAB_CD=en-US -DNO_NSPR_10_SUPPORT -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/libeditor -I. -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/dom/base -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/editor/txmgr -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/extensions/spellcheck/src -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/layout/generic -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/layout/style -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/layout/tables -I/usr/ports/opt-arm/firefox/work/src/mozilla-release/layout/xul -I../../dist/include -I/usr/include/nspr -I/usr/include/nss -I/usr/include/pixman-1 -fPIC -DMOZILLA_CLIENT -include ../../mozilla-config.h -MD -MP -MF .deps/Unified_cpp_editor_libeditor1.o.pp -Wall -Wempty-body -Woverloaded-virtual -Wsign-compare -Wwrite-strings -Wno-invalid-offsetof -O2 -pipe -mfloat-abi=hard -march=armv7-a -mfpu=vfpv3-d16 -fno-exceptions -fno-strict-aliasing -fno-rtti -fno-exceptions -fno-math-errno -std=gnu++0x -pthread -pipe -DNDEBUG -DTRIMMED -g -O2 -pipe -mfloat-abi=hard -march=armv7-a -mfpu=vfpv3-d16 -fomit-frame-pointer /usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/editor/libeditor/Unified_cpp_editor_libeditor1.cpp
/usr/ports/opt-arm/firefox/work/src/mozilla-release/config/rules.mk:930: recipe for target ‘Unified_cpp_editor_libeditor1.o’ failed
make[5]: * [Unified_cpp_editor_libeditor1.o] Error 1
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/editor/libeditor’
/usr/ports/opt-arm/firefox/work/src/mozilla-release/config/recurse.mk:74: recipe for target ‘editor/libeditor/target’ failed
make[4]: * [editor/libeditor/target] Error 2
make[4]: * Waiting for unfinished jobs....
libaccessible_base.a.desc
make[5]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared/accessible/base’
make[4]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared’
/usr/ports/opt-arm/firefox/work/src/mozilla-release/config/recurse.mk:36: recipe for target ‘compile’ failed
make[3]: * [compile] Error 2
make[3]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared’ /usr/ports/opt-arm/firefox/work/src/mozilla-release/config/rules.mk:541: recipe for target ‘default’ failed
make[2]: * [default] Error 2
make[2]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release/firefox-shared’
/usr/ports/opt-arm/firefox/work/src/mozilla-release/client.mk:400: recipe for target ‘realbuild’ failed
make[1]: * [realbuild] Error 2
make[1]: Leaving directory ‘/usr/ports/opt-arm/firefox/work/src/mozilla-release’ client.mk:171: recipe for target ‘build’ failed
make: *** [build] Error 2
======⇒ ERROR: Building ‘/usr/ports/opt-arm/firefox/firefox#39.0-2.pkg.tar.gz’ failed.
|
|
78 | CRUX-ARM | toolchain | Bug Report | Low | toolchain: gcc-static unnecessarily rebuilt | Closed | |
Task Description
gcc-static is unnecessarily rebuilt each time make is invoked due to an incorrect filename extension in the Makefile target definition. Patch follows:
diff –git a/Makefile b/Makefile
index 4ab3882..568739d 100644
— a/Makefile
+++ b/Makefile
@@ -173,10 +173,10 @@ binutils-distclean: binutils-clean
# GCC-STATIC
-$(WORK)/gcc-$(GCC_VERSION).tar.bz2:
+$(WORK)/gcc-$(GCC_VERSION).tar.xz:
wget -P $(WORK) -c ftp://gcc.gnu.org/pub/gcc/releases/gcc-$(GCC_VERSION)/gcc-$(GCC_VERSION).tar.xz
-$(WORK)/gcc-$(GCC_VERSION): $(WORK)/gcc-$(GCC_VERSION).tar.bz2
+$(WORK)/gcc-$(GCC_VERSION): $(WORK)/gcc-$(GCC_VERSION).tar.xz
tar -C $(WORK) -xf $(WORK)/gcc-$(GCC_VERSION).tar.xz
touch $(WORK)/gcc-$(GCC_VERSION)
|
|
37 | CRUX-ARM | website | Bug Report | Low | Typos in Flyspray | Closed | |
Task Description
There are two typos in Flyspray. The first is in the page titles. Note that there is a separator missing, and duplication of “CRUX-ARM” - here is the page title I have right now:
CRUX-ARM | bugsCRUX-ARM: New Task
I suggest this be fixed to look more like Crux’s, which reads:
Flyspray:: CRUX: New Task
So we should just replace “CRUX” with “CRUX-ARM”
The second typo is when a user enters an incorrect password. When a user enters a bad password, an error appears at the bottom of the webpage that says something about the “paassword” being incorrect or something. The word “password” is spelled incorrectly.
|
|
50 | CRUX-ARM | crossrootfs | Bug Report | Medium | coreutils: update to 8.20 fails | Closed | |
Task Description
...
GEN lib/fcntl.h
GEN lib/selinux/selinux.h
GEN lib/selinux/context.h
CC src/make-prime-list.o
CCLD src/make-prime-list
GEN src/primes.h
/bin/sh: src/make-prime-list: cannot execute binary file
|
|
51 | CRUX-ARM | crossrootfs | Bug Report | Medium | libarchive: fails trying to link with host's libs | Closed | |
Task Description
...
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./libarchive -I./libarchive_fe -DLIBARCHIVE_STATIC -Wall -Wformat -Wformat-security -O2 -pipe -mfloat-abi=hard -MT cpio/bsdcpio-cmdline.o -MD -MP -MF cpio/.deps/bsdcpio-cmdline.Tpo -c -o cpio/bsdcpio-cmdline.o `test -f 'cpio/cmdline.c' || echo './'`cpio/cmdline.c
mv -f cpio/.deps/bsdcpio-cmdline.Tpo cpio/.deps/bsdcpio-cmdline.Po
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I./libarchive -I./libarchive_fe -DLIBARCHIVE_STATIC -Wall -Wformat -Wformat-security -O2 -pipe -mfloat-abi=hard -MT cpio/bsdcpio-cpio.o -MD -MP -MF cpio/.deps/bsdcpio-cpio.Tpo -c -o cpio/bsdcpio-cpio.o `test -f 'cpio/cpio.c' || echo './'`cpio/cpio.c
mv -f tar/.deps/bsdtar-write.Tpo tar/.deps/bsdtar-write.Po
/bin/sh ./libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -Wall -Wformat -Wformat-security -O2 -pipe -mfloat-abi=hard -no-undefined -version-info 12:4:0 -o libarchive.la -rpath /usr/lib libarchive/archive_acl.lo libarchive/archive_check_magic.lo libarchive/archive_crypto.lo libarchive/archive_entry.lo libarchive/archive_entry_copy_stat.lo libarchive/archive_entry_link_resolver.lo libarchive/archive_entry_sparse.lo libarchive/archive_entry_stat.lo libarchive/archive_entry_strmode.lo libarchive/archive_entry_xattr.lo libarchive/archive_getdate.lo libarchive/archive_match.lo libarchive/archive_options.lo libarchive/archive_pathmatch.lo libarchive/archive_ppmd7.lo libarchive/archive_rb.lo libarchive/archive_read.lo libarchive/archive_read_data_into_fd.lo libarchive/archive_read_disk_entry_from_file.lo libarchive/archive_read_disk_posix.lo libarchive/archive_read_disk_set_standard_lookup.lo libarchive/archive_read_extract.lo libarchive/archive_read_open_fd.lo libarchive/archive_read_open_file.lo libarchive/archive_read_open_filename.lo libarchive/archive_read_open_memory.lo libarchive/archive_read_set_options.lo libarchive/archive_read_support_filter_all.lo libarchive/archive_read_support_filter_bzip2.lo libarchive/archive_read_support_filter_compress.lo libarchive/archive_read_support_filter_gzip.lo libarchive/archive_read_support_filter_none.lo libarchive/archive_read_support_filter_program.lo libarchive/archive_read_support_filter_rpm.lo libarchive/archive_read_support_filter_uu.lo libarchive/archive_read_support_filter_xz.lo libarchive/archive_read_support_format_7zip.lo libarchive/archive_read_support_format_all.lo libarchive/archive_read_support_format_ar.lo libarchive/archive_read_support_format_by_code.lo libarchive/archive_read_support_format_cab.lo libarchive/archive_read_support_format_cpio.lo libarchive/archive_read_support_format_empty.lo libarchive/archive_read_support_format_iso9660.lo libarchive/archive_read_support_format_lha.lo libarchive/archive_read_support_format_mtree.lo libarchive/archive_read_support_format_rar.lo libarchive/archive_read_support_format_raw.lo libarchive/archive_read_support_format_tar.lo libarchive/archive_read_support_format_xar.lo libarchive/archive_read_support_format_zip.lo libarchive/archive_string.lo libarchive/archive_string_sprintf.lo libarchive/archive_util.lo libarchive/archive_virtual.lo libarchive/archive_write.lo libarchive/archive_write_disk_posix.lo libarchive/archive_write_disk_set_standard_lookup.lo libarchive/archive_write_open_fd.lo libarchive/archive_write_open_file.lo libarchive/archive_write_open_filename.lo libarchive/archive_write_open_memory.lo libarchive/archive_write_add_filter.lo libarchive/archive_write_add_filter_bzip2.lo libarchive/archive_write_add_filter_compress.lo libarchive/archive_write_add_filter_gzip.lo libarchive/archive_write_add_filter_none.lo libarchive/archive_write_add_filter_program.lo libarchive/archive_write_add_filter_xz.lo libarchive/archive_write_set_format.lo libarchive/archive_write_set_format_7zip.lo libarchive/archive_write_set_format_ar.lo libarchive/archive_write_set_format_by_name.lo libarchive/archive_write_set_format_cpio.lo libarchive/archive_write_set_format_cpio_newc.lo libarchive/archive_write_set_format_iso9660.lo libarchive/archive_write_set_format_mtree.lo libarchive/archive_write_set_format_pax.lo libarchive/archive_write_set_format_shar.lo libarchive/archive_write_set_format_ustar.lo libarchive/archive_write_set_format_gnutar.lo libarchive/archive_write_set_format_xar.lo libarchive/archive_write_set_format_zip.lo libarchive/archive_write_set_options.lo libarchive/filter_fork.lo -lacl -llzma -lbz2 -lz
libtool: link: arm-crux-linux-gnueabihf-gcc -shared -fPIC -DPIC libarchive/.libs/archive_acl.o libarchive/.libs/archive_check_magic.o libarchive/.libs/archive_crypto.o libarchive/.libs/archive_entry.o libarchive/.libs/archive_entry_copy_stat.o libarchive/.libs/archive_entry_link_resolver.o libarchive/.libs/archive_entry_sparse.o libarchive/.libs/archive_entry_stat.o libarchive/.libs/archive_entry_strmode.o libarchive/.libs/archive_entry_xattr.o libarchive/.libs/archive_getdate.o libarchive/.libs/archive_match.o libarchive/.libs/archive_options.o libarchive/.libs/archive_pathmatch.o libarchive/.libs/archive_ppmd7.o libarchive/.libs/archive_rb.o libarchive/.libs/archive_read.o libarchive/.libs/archive_read_data_into_fd.o libarchive/.libs/archive_read_disk_entry_from_file.o libarchive/.libs/archive_read_disk_posix.o libarchive/.libs/archive_read_disk_set_standard_lookup.o libarchive/.libs/archive_read_extract.o libarchive/.libs/archive_read_open_fd.o libarchive/.libs/archive_read_open_file.o libarchive/.libs/archive_read_open_filename.o libarchive/.libs/archive_read_open_memory.o libarchive/.libs/archive_read_set_options.o libarchive/.libs/archive_read_support_filter_all.o libarchive/.libs/archive_read_support_filter_bzip2.o libarchive/.libs/archive_read_support_filter_compress.o libarchive/.libs/archive_read_support_filter_gzip.o libarchive/.libs/archive_read_support_filter_none.o libarchive/.libs/archive_read_support_filter_program.o libarchive/.libs/archive_read_support_filter_rpm.o libarchive/.libs/archive_read_support_filter_uu.o libarchive/.libs/archive_read_support_filter_xz.o libarchive/.libs/archive_read_support_format_7zip.o libarchive/.libs/archive_read_support_format_all.o libarchive/.libs/archive_read_support_format_ar.o libarchive/.libs/archive_read_support_format_by_code.o libarchive/.libs/archive_read_support_format_cab.o libarchive/.libs/archive_read_support_format_cpio.o libarchive/.libs/archive_read_support_format_empty.o libarchive/.libs/archive_read_support_format_iso9660.o libarchive/.libs/archive_read_support_format_lha.o libarchive/.libs/archive_read_support_format_mtree.o libarchive/.libs/archive_read_support_format_rar.o libarchive/.libs/archive_read_support_format_raw.o libarchive/.libs/archive_read_support_format_tar.o libarchive/.libs/archive_read_support_format_xar.o libarchive/.libs/archive_read_support_format_zip.o libarchive/.libs/archive_string.o libarchive/.libs/archive_string_sprintf.o libarchive/.libs/archive_util.o libarchive/.libs/archive_virtual.o libarchive/.libs/archive_write.o libarchive/.libs/archive_write_disk_posix.o libarchive/.libs/archive_write_disk_set_standard_lookup.o libarchive/.libs/archive_write_open_fd.o libarchive/.libs/archive_write_open_file.o libarchive/.libs/archive_write_open_filename.o libarchive/.libs/archive_write_open_memory.o libarchive/.libs/archive_write_add_filter.o libarchive/.libs/archive_write_add_filter_bzip2.o libarchive/.libs/archive_write_add_filter_compress.o libarchive/.libs/archive_write_add_filter_gzip.o libarchive/.libs/archive_write_add_filter_none.o libarchive/.libs/archive_write_add_filter_program.o libarchive/.libs/archive_write_add_filter_xz.o libarchive/.libs/archive_write_set_format.o libarchive/.libs/archive_write_set_format_7zip.o libarchive/.libs/archive_write_set_format_ar.o libarchive/.libs/archive_write_set_format_by_name.o libarchive/.libs/archive_write_set_format_cpio.o libarchive/.libs/archive_write_set_format_cpio_newc.o libarchive/.libs/archive_write_set_format_iso9660.o libarchive/.libs/archive_write_set_format_mtree.o libarchive/.libs/archive_write_set_format_pax.o libarchive/.libs/archive_write_set_format_shar.o libarchive/.libs/archive_write_set_format_ustar.o libarchive/.libs/archive_write_set_format_gnutar.o libarchive/.libs/archive_write_set_format_xar.o libarchive/.libs/archive_write_set_format_zip.o libarchive/.libs/archive_write_set_options.o libarchive/.libs/filter_fork.o -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib /des/crux-arm/3.0/toolchain/clfs/usr/lib/libacl.so -L/usr/lib /usr/lib/libattr.so /des/crux-arm/3.0/toolchain/clfs/usr/lib/liblzma.so -lbz2 -lz -O2 -mfloat-abi=hard -pthread -Wl,-soname -Wl,libarchive.so.12 -o .libs/libarchive.so.12.0.4
/usr/lib/libattr.so: could not read symbols: File in wrong format
collect2: error: ld returned 1 exit status
make[1]: * [libarchive.la] Error 1
make[1]: * Waiting for unfinished jobs....
|
|
52 | CRUX-ARM | crossrootfs | Bug Report | Medium | udev 182 fails with libtool linking with host | Closed | |
Task Description
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -include ./config.h -I./src -DSYSCONFDIR=\""/etc"\" -DPKGLIBEXECDIR=\""/lib/udev"\" -DFIRMWARE_PATH="\"/lib/firmware/updates/\", \
"/lib/firmware/\"" -DUSB_DATABASE=\"/usr/share/usb.ids\" -DPCI_DATABASE=\"/des/crux-arm/3.0/toolchain/clfs/usr/share\" -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat
-abi=hard -MT src/udevadm-udevadm-test.o -MD -MP -MF src/.deps/udevadm-udevadm-test.Tpo -c -o src/udevadm-udevadm-test.o `test -f 'src/udevadm-test.c' || echo './'`src/udevadm-test
.c
mv -f src/.deps/udevadm-udevadm-test.Tpo src/.deps/udevadm-udevadm-test.Po
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -include ./config.h -I./src -DSYSCONFDIR=\""/etc"\" -DPKGLIBEXECDIR=\""/lib/udev"\" -DFIRMWARE_PATH="\"/lib/firmware/updates/\", \
"/lib/firmware/\"" -DUSB_DATABASE=\"/usr/share/usb.ids\" -DPCI_DATABASE=\"/des/crux-arm/3.0/toolchain/clfs/usr/share\" -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat
-abi=hard -MT src/udevadm-udevadm-test-builtin.o -MD -MP -MF src/.deps/udevadm-udevadm-test-builtin.Tpo -c -o src/udevadm-udevadm-test-builtin.o `test -f 'src/udevadm-test-builtin.
c' || echo './'`src/udevadm-test-builtin.c
mv -f src/.deps/udevadm-udevadm-test-builtin.Tpo src/.deps/udevadm-udevadm-test-builtin.Po
/bin/sh ./libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat-abi=hard -Wl,–gc-sections -Wl,–as-needed -o u
devadm src/udevadm-udev-event.o src/udevadm-udev-watch.o src/udevadm-udev-node.o src/udevadm-udev-rules.o src/udevadm-udev-ctrl.o src/udevadm-udev-builtin.o src/udevadm-udev-builti
n-blkid.o src/udevadm-udev-builtin-firmware.o src/udevadm-udev-builtin-hwdb.o src/udevadm-udev-builtin-input_id.o src/udevadm-udev-builtin-kmod.o src/udevadm-udev-builtin-path_id.o
src/udevadm-udev-builtin-usb_id.o src/udevadm-udevadm.o src/udevadm-udevadm-info.o src/udevadm-udevadm-control.o src/udevadm-udevadm-monitor.o src/udevadm-udevadm-settle.o src/ude
vadm-udevadm-trigger.o src/udevadm-udevadm-test.o src/udevadm-udevadm-test-builtin.o libudev-private.la -lblkid -lkmod -lrt
libtool: link: arm-crux-linux-gnueabihf-gcc -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat-abi=hard -Wl,–gc-sections -Wl,–as-needed -o udevadm src/udevadm-udev-event.
o src/udevadm-udev-watch.o src/udevadm-udev-node.o src/udevadm-udev-rules.o src/udevadm-udev-ctrl.o src/udevadm-udev-builtin.o src/udevadm-udev-builtin-blkid.o src/udevadm-udev-bui
ltin-firmware.o src/udevadm-udev-builtin-hwdb.o src/udevadm-udev-builtin-input_id.o src/udevadm-udev-builtin-kmod.o src/udevadm-udev-builtin-path_id.o src/udevadm-udev-builtin-usb_
id.o src/udevadm-udevadm.o src/udevadm-udevadm-info.o src/udevadm-udevadm-control.o src/udevadm-udevadm-monitor.o src/udevadm-udevadm-settle.o src/udevadm-udevadm-trigger.o src/ude
vadm-udevadm-test.o src/udevadm-udevadm-test-builtin.o ./.libs/libudev-private.a /des/crux-arm/3.0/toolchain/clfs/usr/lib/libblkid.so /usr/lib/libuuid.so /des/crux-arm/3.0/toolcha
in/clfs/usr/lib/libkmod.so -lrt -Wl,-rpath -Wl,/usr/lib -Wl,-rpath -Wl,/usr/lib
/usr/lib/libuuid.so: could not read symbols: File in wrong format
collect2: error: ld returned 1 exit status
make[2]: * [udevadm] Error 1 make[1]: * [all-recursive] Error 1
make: *** [all] Error 2
|
|
53 | CRUX-ARM | crossrootfs | Bug Report | Medium | shadow: linking with host | Closed | |
Task Description
/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/libshadow.la
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -O2 -pipe -mfloat-abi=hard -MT useradd.o -MD -MP -MF .deps/useradd.Tpo -c -o useradd.o useradd.c
mv -f .deps/useradd.Tpo .deps/useradd.Po
/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/libshadow.la -lacl -lattr
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a /des/crux-arm/3.0/toolchain/clfs/usr/lib/libacl.so /usr/lib/libattr.so /des/crux-arm/3.0/toolchain/clfs/usr/lib/libattr.so -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib
/usr/lib/libattr.so: could not read symbols: File in wrong format
collect2: error: ld returned 1 exit status
make[2]: * [useradd] Error 1
make[2]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1/src'
make[1]: * [all-recursive] Error 1
make[1]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1'
make: * [all] Error 2
/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/libshadow.la
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -O2 -pipe -mfloat-abi=hard -MT useradd.o -MD -MP -MF .deps/useradd.Tpo -c -o useradd.o useradd.c
mv -f .deps/useradd.Tpo .deps/useradd.Po
/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/libshadow.la -lacl -lattr
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a /des/crux-arm/3.0/toolchain/clfs/usr/lib/libacl.so /usr/lib/libattr.so /des/crux-arm/3.0/toolchain/clfs/usr/lib/libattr.so -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib
/usr/lib/libattr.so: could not read symbols: File in wrong format
collect2: error: ld returned 1 exit status
make[2]: * [useradd] Error 1
make[2]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1/src'
make[1]: * [all-recursive] Error 1
make[1]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1'
make: * [all] Error 2
|
|
71 | CRUX-ARM | crossrootfs | Bug Report | Low | libtool issues with crosscompilation | Closed | |
Task Description
libtool tries to relink during installation but failed due to host libraries
libtool: relink: arm-crux-linux-gnueabihf-g++ -fPIC -DPIC -shared -nostdlib /home/sepen/devel/crux-arm/toolchain/clfs/usr/lib/crti.o /home/sepen/devel/crux-arm/toolchain/crosstools/lib/gcc/arm-crux-linux-gnueabihf/4.8.3/crtbeginS.o .libs/dummy.o cxx/.libs/isfuns.o cxx/.libs/ismpf.o cxx/.libs/ismpq.o cxx/.libs/ismpz.o cxx/.libs/ismpznw.o cxx/.libs/limits.o cxx/.libs/osdoprnti.o cxx/.libs/osfuns.o cxx/.libs/osmpf.o cxx/.libs/osmpq.o cxx/.libs/osmpz.o -Wl,-rpath -Wl,/home/sepen/devel/crux-arm/toolchain/crosstools/lib/gcc/arm-crux-linux-gnueabihf/4.8.3/../../../../arm-crux-linux-gnueabihf/lib -L/home/sepen/devel/crux-arm/ports/crossrootfs/libgmp/work/pkg/usr/lib -L/usr/lib -lgmp -L/home/sepen/devel/crux-arm/toolchain/crosstools/lib/gcc/arm-crux-linux-gnueabihf/4.8.3 -L/home/sepen/devel/crux-arm/toolchain/crosstools/lib/gcc/arm-crux-linux-gnueabihf/4.8.3/../../../../arm-crux-linux-gnueabihf/lib -L/home/sepen/devel/crux-arm/toolchain/clfs/lib -L/home/sepen/devel/crux-arm/toolchain/clfs/usr/lib -L/home/sepen/devel/crux-arm/ports/crossrootfs/libgmp/work/pkg/home/sepen/devel/crux-arm/toolchain/crosstools/lib/gcc/arm-crux-linux-gnueabihf/4.8.3/../../../../arm-crux-linux-gnueabihf/lib -lstdc++ -lm -lc -lgcc_s /home/sepen/devel/crux-arm/toolchain/crosstools/lib/gcc/arm-crux-linux-gnueabihf/4.8.3/crtendS.o /home/sepen/devel/crux-arm/toolchain/clfs/usr/lib/crtn.o -O2 -mfloat-abi=hard -Wl,-soname -Wl,libgmpxx.so.4 -o .libs/libgmpxx.so.4.4.0
/usr/lib/libstdc++.so: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
libtool: install: error: relink `libgmpxx.la’ with the above command before installing it
There is a good explanation of the problem in this thread:
https://lists.debian.org/debian-devel/2011/02/msg00196.html (Fun with libtool and cross-builds)
We can reproduce that problem when building crossrootfs on a x86_64 host. Our final target is arm 32bits so we can’t link against non-32bits objects, and that is for what we didn’t detect issues when building crossrootfs on a x86 host.
I’m not happy with this situation.
|
|
60 | CRUX-ARM | initramfs | Bug Report | Medium | initramfs: no job control in shell | Closed | |
Task Description
this is related to FS#59
|
|
59 | CRUX-ARM | initrd | Bug Report | Medium | Initrd shell prints wrong version and has no job contro ... | Closed | |
Task Description
Hi, when booting the 3.0 initrd on my EOMA68-A20 I have the following message with the wrong CRUX-ARM version in the banner and no job control on the shell. Job control is important because if I run "ping" I can never recover the shell without a reboot due to the inability to ctrl-c.
CRUX-ARM 2.8 - https://crux-arm.nu/
* Mounting filesystems... OK
* Populating /dev via mdev... OK
* Registering mdev as hotplug agent... OK
* Creating and mounting /dev/pts... OK
* Starting kernel log daemon... OK
* Setting hostname... OK
* Loading network loopback device... OK
* Saving boot messages... OK
* Trying to find and mount the media installer...
* Searching for the CRUX media...
* The CRUX media was not properly mounted!
Spawning a shell for you to attempt to fix this problem. If
you are able to find the correct device, mount it at
/media and then log out of this shell to continue.
If you are NOT able to fix the problem, installation will
not be possible.
/bin/sh: can't access tty; job control turned off
~ #
|
|
15 | CRUX-ARM | ports/core-arm | Bug Report | Low | perl: footprint mismatch | Closed | |
Task Description
======⇒ ERROR: Footprint mismatch found:
NEW -rw-r–r– root/root usr/lib/perl5/5.12/linux-thread-multi/ODBM_File.pm
NEW drwxr-xr-x root/root usr/lib/perl5/5.12/linux-thread-multi/auto/ODBM_File/
NEW -rwxr-xr-x root/root usr/lib/perl5/5.12/linux-thread-multi/auto/ODBM_File/ODBM_File
.so
NEW -rw-r–r– root/root usr/man/man3/ODBM_File.3pm.gz
======⇒ ERROR: Building ‘/usr/ports/pkg/perl#5.12.4-1.pkg.tar.xz’ failed.
|
|
57 | CRUX-ARM | ports/core-arm | Bug Report | High | iptables: generic build fails | Closed | |
Task Description
iptables fails in the generic build:
CCLD libip6t_NETMAP.so
/usr/bin/ld: cannot find -lip6tc
collect2: error: ld returned 1 exit status
make[2]: *** [libip6t_NETMAP.so] Error 1
|
|
4 | CRUX-ARM | ports/core-cross | Bug Report | Low | perl: update to 5.12.3 | Closed | |
Task Description
There are some problems trying to cross-build perl to the new version.
Here there are some notes about the work done (but not working):
- The Pkgfile tries to build the needed hosts tools and then build perl.
- The config provided got from versatile native configure.
May be a bad way to try to cross-build it. Waiting comments and suggestions to cross-build perl.
|
|
68 | CRUX-ARM | ports/cubieboard-arm | Update Request | Medium | firefox: build update to 26.0 fails in cubieboard | Closed | |
Task Description
Current error trying to build firefox on the cubieboard:
c++ -o BufferUnrotate.o -c -fvisibility=hidden -DMOZ_GLUE_IN_PROGRAM -DMOZILLA_INTERNAL_API -DIMPL_LIBXUL -DSTATIC_EXPORTABLE_JS_API -DNO_NSPR
_10_SUPPORT -DOS_POSIX=1 -DOS_LINUX=1 -I../../ipc/chromium/src -I../../ipc/glue -I../../ipc/ipdl/_ipdlheaders -I../../content/events/src -I/fr
ameworks/base/include/media/stagefright -I/frameworks/base/include/media/stagefright/openmax -I/frameworks/av/include/media/stagefright -I/frame
works/native/include/media/openmax -I../../gfx/layers -I. -I../../dist/include -I/usr/include/nspr -I/usr/include/nss -fPIC -DMOZILLA_C
LIENT -include ../../mozilla-config.h -MD -MP -MF .deps/BufferUnrotate.o.pp -Wall -Wpointer-arith -Woverloaded-virtual -Werror=return-type -Wty
pe-limits -Wempty-body -Wsign-compare -Wno-invalid-offsetof -O2 -pipe -mfloat-abi=hard -mfpu=neon -mcpu=cortex-a8 -mtune=cortex-a8 -fno-exceptio
ns -fno-strict-aliasing -fno-rtti -ffunction-sections -fdata-sections -fno-exceptions -fno-math-errno -std=gnu++0x -pthread -pipe -DNDEBUG -DTR
IMMED -g -O2 -pipe -mfloat-abi=hard -mfpu=neon -mcpu=cortex-a8 -mtune=cortex-a8 -fomit-frame-pointer -I/usr/include/cairo -I/usr/include/glib-2.
0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/cairo -I/usr/include/glib
-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/pixman-1 -I../../widg
et/gtk2/compat -pthread -I/usr/include/gtk-2.0 -I/usr/include/gtk-unix-print-2.0 -I/usr/include/gtk-2.0 -I/usr/include/atk-1.0 -I/usr/include/pa
ngo-1.0 -I/usr/include/harfbuzz -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/p
ixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/li
b/glib-2.0/include /mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp: In function 'void BufferUnrotate(uint8_t*, int, int, int, int, int)':
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:34:60: error: 'memcpy' was not declared in this scope
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:35:86: error: 'memmove' was not declared in this scope
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:57:77: error: 'memcpy' was not declared in this scope
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:58:90: error: 'memmove' was not declared in this scope
make[3]: * [BufferUnrotate.o] Error 1
make[3]: Leaving directory `/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers'
make[2]: * [compile] Error 2
make[2]: Leaving directory `/mnt/work_cb1/firefox/src/mozilla-release/gfx'
make[1]: * [compile] Error 2
make[1]: Leaving directory `/mnt/work_cb1/firefox/src/mozilla-release'
make: * [default] Error 2
There is a patch to solve it. Currently testing locally.
— a/mozilla-release/gfx/layers/BufferUnrotate.cpp
+++ b/mozilla-release/gfx/layers/BufferUnrotate.cpp
@@ -8,6 +8,7 @@
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
+#include <string.h> /* memcpy() memmove() */
void BufferUnrotate(uint8_t* aBuffer, int aByteWidth, int aHeight,
int aByteStride, int aXBoundary, int aYBoundary)
|
|
38 | CRUX-ARM | ports/cubox-arm | Bug Report | Low | Xorg input devices not working with udev 167, working w ... | Closed | |
Task Description
Xorg input devices would not work for me using core-arm/udev (version 167) on a cubox platform.
I upgraded to version 182 and the input devices worked fine. I had to patch udev to replace calls to accept4() with accept(). Pkgfile (based on core/udev) and patch appear below:
######## Pkgfile ############
# Description: Userspace device management daemon
# URL: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html # Maintainer: CRUX System Team, core-ports at crux dot nu
# Depends on: kmod
name=udev version=182
release=1
source=(ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/$name-$version.tar.x
z \
pre-accept4-kernel.patch 81-crux.rules start_udev)
build() {
cd udev-$version
patch -p1 < $SRC/pre-accept4-kernel.patch
./configure --prefix=/usr \
--sbindir=/sbin --bindir=/sbin \
--sysconfdir=/etc \
--with-rootlibdir=/lib \
--with-rootprefix= \
--libexecdir=/lib \
--mandir=/usr/man \
--disable-introspection \
--disable-gudev \
--disable-udev_acl \ --disable-keymap \
--enable-static \
--enable-rule_generator
make
make install DESTDIR=$PKG
mkdir -p $PKG/lib/{firmware,udev/devices/{pts,shm}}
mkdir -p $PKG/{lib,sbin,run}
# Symlink to udevd
ln -s ../lib/udev/udevd $PKG/sbin/udevd
# Add CRUX items
install -m 0755 $SRC/start_udev $PKG/sbin
install -m 0644 $SRC/81-crux.rules $PKG/lib/udev/rules.d
# Remove junk
rm -r $PKG/usr/share/{gtk-,}doc
}
######### pre-accept4-kernel.patch ###########
diff -urN a/src/udev-ctrl.c b/src/udev-ctrl.c
— a/src/udev-ctrl.c 2011-10-09 17:10:32.000000000 -0600
+++ b/src/udev-ctrl.c 2011-10-25 15:11:09.000000000 -0600
@@ -15,6 +15,7 @@
#include <stddef.h>
#include <string.h>
#include <unistd.h>
+#include <fcntl.h>
#include <sys/types.h>
#include <sys/poll.h>
#include <sys/socket.h> @@ -182,6 +183,7 @@
struct ucred ucred;
socklen_t slen;
const int on = 1;
+ int flgs;
conn = calloc(1, sizeof(struct udev_ctrl_connection));
if (conn == NULL)
@@ -189,13 +191,19 @@
conn->refcount = 1;
conn->uctrl = uctrl;
- conn→sock = accept4(uctrl→sock, NULL, NULL, SOCK_CLOEXEC|SOCK_NONBLOCK);
+ conn→sock = accept4(uctrl→sock, NULL, NULL, SOCK_CLOEXEC|SOCK_NONBLOCK);
+ conn→sock = accept(uctrl→sock, NULL, NULL);
if (conn→sock < 0) {
if (errno != EINTR)
err(uctrl→udev, "unable to receive ctrl connection: %m\n");
goto err;
}
+ Since we don't have accept4
+ flgs = fcntl(conn→sock, F_GETFL, NULL); + if(flgs >= 0) fcntl(conn→sock, F_SETFL, flgs | O_NONBLOCK);
+ fcntl(conn→sock, F_SETFD, FD_CLOEXEC); +
/* check peer credential of connection */ slen = sizeof(ucred);
if (getsockopt(conn->sock, SOL_SOCKET, SO_PEERCRED, &ucred, &slen) < 0) {
|
|
19 | CRUX-ARM | ports/efikamx-arm | Bug Report | Medium | udev: version >= 175 and problems with some device kern ... | Closed | |
Task Description
For example, on efika’s there is a problems booting kernel 2.6.31.14.27 and current udev 175
Lot of errors (udevd[XXX]: unable to receive ctrl connection: Function not implemented) spammed and a wait time to finish booting around 2 minutes.
Debian has a patch for kernel which could be good to take a look and decide if could be interesting to apply it to current CRUX-ARM kernel for efikamx device.
Link to patch propossal and explanation:
http://lists.debian.org/debian-kernel/2011/11/msg00241.html
|
|
39 | CRUX-ARM | ports/opt-arm | Bug Report | Low | gst-plugins-base fails during assembler | Closed | |
Task Description
Here is a build of opt/gst-plugins-base (on the cubox) during which the assembler reports:
{standard input}: Assembler messages:
{standard input}:586: Error: immediate value out of range – `movt r2,-32640’ {standard input}:656: Error: immediate value out of range – `movt r2,-32640’
http://sprunge.us/CdeD
The cubox may have some pre-patched or pre-build gstreamer packages for hardware acceleration, but I have not yet investigated them.
|
|
65 | CRUX-ARM | ports/opt-arm | Bug Report | Medium | chromium: failed to build on efikamx devices | Closed | |
Task Description
I only tried with optimized CFLAGS="-O2 -pipe -mfloat-abi=hard -march=armv7-a -mfpu=vfpv3-d16", maybe generic flags could work but anyway we should fix that.
When developing the first overlay port for chromium I found a similar problem with neon when compiling webrtc/common_audio component and I created a patch[1]. This was the error log[2].
Now the problem sounds similar as reported here[3]. This is the current error log[4]. So we can try to create a patch for it.
[1] - https://crux-arm.nu/gitweb?p=ports/opt-arm.git;a=blob_plain;f=chromium/webrtc-arm_neon.patch;hb=0826c9bd07b8f0665e3788fc1671911dd5522554
[2] - error log for webrtc/common_audio:
cc '-DANGLE_DX11' '-DWEBRTC_SVNREVISION="Unavailable(issue687)"' '-D_FILE_OFFSET_BITS=64' '-DDISABLE_NACL' '-DCHROMIUM_BUILD' '-DUSE_DEFAULT_RENDER_THEME=1' '-DUSE_LIBJPEG_TURBO=1' '-DUSE_NSS=1' '-DUSE_X11=1' '-DENABLE_ONE_CLICK_SIGNIN' '-DGTK_DISABLE_SINGLE_INCLUDES=1' '-DENABLE_REMOTING=1' '-DENABLE_WEBRTC=1' '-DUSE_PROPRIETARY_CODECS' '-DENABLE_PEPPER_CDMS' '-DENABLE_CONFIGURATION_POLICY' '-DENABLE_INPUT_SPEECH' '-DENABLE_NOTIFICATIONS' '-DENABLE_GPU=1' '-DENABLE_EGLIMAGE=1' '-DENABLE_TASK_MANAGER=1' '-DENABLE_EXTENSIONS=1' '-DENABLE_PLUGIN_INSTALLATION=1' '-DENABLE_PLUGINS=1' '-DENABLE_SESSION_SERVICE=1' '-DENABLE_THEMES=1' '-DENABLE_BACKGROUND=1' '-DENABLE_AUTOMATION=1' '-DENABLE_GOOGLE_NOW=1' '-DENABLE_FULL_PRINTING=1' '-DENABLE_PRINTING=1' '-DENABLE_SPELLCHECK=1' '-DENABLE_CAPTIVE_PORTAL_DETECTION=1' '-DENABLE_MANAGED_USERS=1' '-DENABLE_MDNS=1' '-DWEBRTC_CHROMIUM_BUILD' '-DWEBRTC_ARCH_ARM' '-DWEBRTC_ARCH_ARM_V7' '-DWEBRTC_DETECT_ARM_NEON' '-DWEBRTC_LINUX' '-D__STDC_CONSTANT_MACROS' '-D__STDC_FORMAT_MACROS' '-DNDEBUG' '-DNVALGRIND' '-DDYNAMIC_ANNOTATIONS_ENABLED=0' '-D_FORTIFY_SOURCE=2' -Ithird_party/webrtc -Ithird_party -I. -fstack-protector --param=ssp-buffer-size=4 -pthread -fno-exceptions -fno-strict-aliasing -Wall -Wno-unused-parameter -Wno-missing-field-initializers -fvisibility=hidden -pipe -fPIC -mfpu=neon -flax-vector-conversions -march=armv7-a -mtune=cortex-a8 -mfloat-abi=hard -mthumb -O2 -fno-ident -fdata-sections -ffunction-sections -O2 -pipe -mfloat-abi=hard -march=armv7-a -I/usr/include/nspr -MMD -MF out/Release/.deps/out/Release/obj.target/common_audio_neon/third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.o.d.raw -O2 -pipe -mfloat-abi=hard -march=armv7-a -mfpu=vfpv3-d16 -I/usr/include/nspr -c -o out/Release/obj.target/common_audio_neon/third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.o third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S: Assembler messages:
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:51: Error: selected FPU does not support instruction – `vmov.i32 q9,#0'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:52: Error: selected FPU does not support instruction – `vmov.i32 q14,#0'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:62: Error: selected processor does not support ARM mode `vmull.s16 q12,d20,d22'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:63: Error: selected processor does not support ARM mode `vmull.s16 q13,d21,d23'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:64: Error: selected processor does not support ARM mode `vpadal.s32 q9,q12'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:65: Error: selected processor does not support ARM mode `vpadal.s32 q14,q13'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:84: Error: selected FPU does not support instruction – `vadd.i64 d18,d19'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:85: Error: selected FPU does not support instruction – `vadd.i64 d28,d29'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:86: Error: selected FPU does not support instruction – `vadd.i64 d18,d28'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:89: Error: selected FPU does not support instruction – `vadd.i64 d17,d18'
third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.S:90: Error: selected processor does not support ARM mode `vshl.s64 d17,d16'
make: * [out/Release/obj.target/common_audio_neon/third_party/webrtc/common_audio/signal_processing/cross_correlation_neon.o] Error 1
make: * Waiting for unfinished jobs....
In file included from third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:16:0:
/usr/lib/gcc/arm-unknown-linux-gnueabihf/4.7.3/include/arm_neon.h:32:2: error: #error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc: In static member function 'static float webrtc::SincResampler::Convolve_NEON(const float*, const float*, const float*, double)':
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:23:3: error: 'float32x4_t' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:23:15: error: expected ';' before 'm_input'
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:24:15: error: expected ';' before 'm_sums1'
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:25:15: error: expected ';' before 'm_sums2'
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:29:5: error: 'm_input' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:29:34: error: 'vld1q_f32' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:31:5: error: 'm_sums1' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:31:56: error: 'vmlaq_f32' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:33:5: error: 'm_sums2' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:38:3: error: 'm_sums1' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:39:71: error: 'vmovq_n_f32' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:39:72: error: 'vmulq_f32' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:40:7: error: 'm_sums2' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:40:56: error: 'vmlaq_f32' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:43:3: error: 'float32x2_t' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:43:15: error: expected ';' before 'm_half'
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:44:34: error: 'm_half' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:44:48: error: 'vpadd_f32' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:44:52: error: 'vget_lane_f32' was not declared in this scope
third_party/webrtc/common_audio/resampler/sinc_resampler_neon.cc:45:1: warning: control reaches end of non-void function [-Wreturn-type]
make: *** [out/Release/obj.target/common_audio_neon/third_party/webrtc/common_audio/resampler/sinc_resampler_neon.o] Error 1
[3] - https://code.google.com/p/chromium/issues/detail?id=154107
[4] - error log for webrtc/commom_audio:
g++ '-DANGLE_DX11' '-D_FILE_OFFSET_BITS=64' '-DDISABLE_NACL' '-DCHROMIUM_BUILD' '-DUSE_DEFAULT_RENDER_THEME=1' '-DUSE_LIBJPEG_TURBO=1' '-DUSE_NSS=1' '-DUSE_X11=1' '-DENABLE_ONE_CLICK_SIGNIN' '-DGTK_DISABLE_SINGLE_INCLUDES=1' '-DENABLE_REMOTING=1' '-DENABLE_WEBRTC=1' '-DUSE_PROPRIETARY_CODECS' '-DENABLE_PEPPER_CDMS' '-DENABLE_CONFIGURATION_POLICY' '-DENABLE_INPUT_SPEECH' '-DENABLE_NOTIFICATIONS' '-DENABLE_GPU=1' '-DENABLE_EGLIMAGE=1' '-DENABLE_TASK_MANAGER=1' '-DENABLE_EXTENSIONS=1' '-DENABLE_PLUGIN_INSTALLATION=1' '-DENABLE_PLUGINS=1' '-DENABLE_SESSION_SERVICE=1' '-DENABLE_THEMES=1' '-DENABLE_BACKGROUND=1' '-DENABLE_AUTOMATION=1' '-DENABLE_GOOGLE_NOW=1' '-DENABLE_FULL_PRINTING=1' '-DENABLE_PRINTING=1' '-DENABLE_SPELLCHECK=1' '-DENABLE_CAPTIVE_PORTAL_DETECTION=1' '-DENABLE_MANAGED_USERS=1' '-DENABLE_MDNS=1' '-DGOOGLE_PROTOBUF_NO_RTTI' '-DGOOGLE_PROTOBUF_NO_STATIC_INITIALIZER' '-DNDEBUG' '-DNVALGRIND' '-DDYNAMIC_ANNOTATIONS_ENABLED=0' -Ithird_party/protobuf -Ithird_party/protobuf/src -fstack-protector --param=ssp-buffer-size=4 -pthread -fno-exceptions -fno-strict-aliasing -Wno-unused-parameter -Wno-mis...skipping...
aecm_core.c:(.text.WebRtcAecm_InitCore+0x212): undefined reference to `WebRtc_GetCPUFeaturesARM'
aecm_core.c:(.text.WebRtcAecm_InitCore+0x278): undefined reference to `WebRtcAecm_StoreAdaptiveChannelNeon'
aecm_core.c:(.text.WebRtcAecm_InitCore+0x27c): undefined reference to `WebRtcAecm_ResetAdaptiveChannelNeon'
aecm_core.c:(.text.WebRtcAecm_InitCore+0x280): undefined reference to `WebRtcAecm_CalcLinearEnergiesNeon'
out/Release/obj.target/third_party/webrtc/modules/../../../audio_processing/third_party/webrtc/modules/audio_processing/aecm/aecm_core.o: In function `WebRtcAec
m_ProcessBlock':
aecm_core.c:(.text.WebRtcAecm_ProcessBlock+0x990): undefined reference to `WebRtcAecm_kSqrtHanning'
out/Release/obj.target/third_party/webrtc/common_audio/../../../common_audio/third_party/webrtc/common_audio/resampler/sinc_resampler.o: In function `webrtc::Si
ncResampler::InitializeCPUSpecificFeatures()':
sinc_resampler.cc:(.text._ZN6webrtc13SincResampler29InitializeCPUSpecificFeaturesEv+0x4): undefined reference to `WebRtc_GetCPUFeaturesARM'
sinc_resampler.cc:(.text._ZN6webrtc13SincResampler29InitializeCPUSpecificFeaturesEv+0x34): undefined reference to `webrtc::SincResampler::Convolve_NEON(float const*, float const*, float const*, double)'
out/Release/obj.target/third_party/webrtc/common_audio/../../../common_audio/third_party/webrtc/common_audio/signal_processing/spl_init.o: In function `InitFunctionPointers':
spl_init.c:(.text.InitFunctionPointers+0x2): undefined reference to `WebRtc_GetCPUFeaturesARM'
spl_init.c:(.text.InitFunctionPointers+0x18c): undefined reference to `WebRtcSpl_MaxAbsValueW16Neon'
spl_init.c:(.text.InitFunctionPointers+0x194): undefined reference to `WebRtcSpl_MaxAbsValueW32Neon'
spl_init.c:(.text.InitFunctionPointers+0x19c): undefined reference to `WebRtcSpl_MaxValueW16Neon'
spl_init.c:(.text.InitFunctionPointers+0x1a4): undefined reference to `WebRtcSpl_MaxValueW32Neon'
spl_init.c:(.text.InitFunctionPointers+0x1ac): undefined reference to `WebRtcSpl_MinValueW16Neon'
spl_init.c:(.text.InitFunctionPointers+0x1b4): undefined reference to `WebRtcSpl_MinValueW32Neon'
spl_init.c:(.text.InitFunctionPointers+0x1bc): undefined reference to `WebRtcSpl_CrossCorrelationNeon'
spl_init.c:(.text.InitFunctionPointers+0x1c4): undefined reference to `WebRtcSpl_DownsampleFastNeon'
spl_init.c:(.text.InitFunctionPointers+0x1cc): undefined reference to `WebRtcSpl_ScaleAndAddVectorsWithRoundNeon'
out/Release/obj.target/third_party/webrtc/modules/../../../iSACFix/third_party/webrtc/modules/audio_coding/codecs/isac/fix/source/isacfix.o: In function `WebRtcIsacfix_EncoderInit':
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x110): undefined reference to `WebRtc_GetCPUFeaturesARM'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1c8): undefined reference to `WebRtcIsacfix_AutocorrNeon'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1cc): undefined reference to `WebRtcIsacfix_FilterMaLoopNeon'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1d0): undefined reference to `WebRtcIsacfix_Spec2TimeNeon'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1d4): undefined reference to `WebRtcIsacfix_Time2SpecNeon'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1d8): undefined reference to `WebRtcIsacfix_CalculateResidualEnergyNeon'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1dc): undefined reference to `WebRtcIsacfix_AllpassFilter2FixDec16Neon'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1e0): undefined reference to `WebRtcIsacfix_MatrixProduct1Neon'
isacfix.c:(.text.WebRtcIsacfix_EncoderInit+0x1e4): undefined reference to `WebRtcIsacfix_MatrixProduct2Neon'
out/Release/obj.target/third_party/webrtc/modules/../../../iSACFix/third_party/webrtc/modules/audio_coding/codecs/isac/fix/source/transform.o: In function `WebRtcIsacfix_Time2SpecC':
transform.c:(.text.WebRtcIsacfix_Time2SpecC+0x320): undefined reference to `WebRtcIsacfix_kCosTab1'
transform.c:(.text.WebRtcIsacfix_Time2SpecC+0x324): undefined reference to `WebRtcIsac
|
|
7 | CRUX-ARM | ports/opt-armhf | Bug Report | Low | mpg123: problem building | Closed | |
Task Description
Report:
/bin/sh ../../libtool –tag=CC –mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I../../src/libmpg123 -DOPT_ARM -DREAL_IS_FIXED -O2 -fomit-
frame-pointer -funroll-all-loops -finline-functions -ffast-math -O2 -march=armv7-a -mfpu=vfpv3-d16 -mthumb -MT layer3.lo -MD -MP -MF .deps/layer3.Tpo -c -o l
ayer3.lo layer3.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -I../../src/libmpg123 -DOPT_ARM -DREAL_IS_FIXED -O2 -fomit-frame-pointer -funroll-all-loops
-finline-functions -ffast-math -O2 -march=armv7-a -mfpu=vfpv3-d16 -mthumb -MT layer3.lo -MD -MP -MF .deps/layer3.Tpo -c layer3.c -fPIC -DPIC -o .libs/layer3
.o
/tmp/cckBsykf.s: Assembler messages:
/tmp/cckBsykf.s:2839: Error: shift must be constant – `orr fp,fp,r7,lsl sl’ /tmp/cckBsykf.s:2868: Error: shift must be constant – `orr fp,fp,r7,lsl sl’ /tmp/cckBsykf.s:3071: Error: shift must be constant – `orr r5,r5,r7,lsl sl’ /tmp/cckBsykf.s:3268: Error: shift must be constant – `orr r6,r6,r7,lsl sl’ /tmp/cckBsykf.s:3290: Error: shift must be constant – `orr r6,r6,r7,lsl sl’ /tmp/cckBsykf.s:3313: Error: shift must be constant – `orr r6,r6,r7,lsl sl’ /tmp/cckBsykf.s:3336: Error: shift must be constant – `orr fp,fp,r4,lsl r5’ /tmp/cckBsykf.s:3358: Error: shift must be constant – `orr fp,fp,r3,lsl r5’ /tmp/cckBsykf.s:4653: Error: shift must be constant – `orr sl,sl,r7,lsl r8’ /tmp/cckBsykf.s:4864: Error: shift must be constant – `orr sl,sl,r7,lsl r8’ /tmp/cckBsykf.s:4893: Error: shift must be constant – `orr r7,r7,r8,lsl sl’ /tmp/cckBsykf.s:5105: Error: shift must be constant – `orr sl,sl,r5,lsl r7’ /tmp/cckBsykf.s:5155: Error: shift must be constant – `orr sl,sl,r5,lsl r7’ /tmp/cckBsykf.s:5179: Error: shift must be constant – `orr sl,sl,r7,lsl r8’ /tmp/cckBsykf.s:5326: Error: shift must be constant – `orr sl,sl,r3,lsl r5’ /tmp/cckBsykf.s:5350: Error: shift must be constant – `orr sl,sl,r3,lsl r4’ make[3]: * [layer3.lo] Error 1
make[3]: Leaving directory `/nfs/crux/efikamx/work/src/mpg123-1.13.3/src/libmpg123’
make[2]: * [all-recursive] Error 1
make[2]: Leaving directory `/nfs/crux/efikamx/work/src/mpg123-1.13.3/src’ make[1]: * [all] Error 2
make[1]: Leaving directory `/nfs/crux/efikamx/work/src/mpg123-1.13.3/src’
make: * [all-recursive] Error 1
======⇒ ERROR: Building ‘/nfs/crux/efikamx/pkg/mpg123#1.13.3-1.pkg.tar.gz’ failed.
|
|
54 | CRUX-ARM | toolchain | Bug Report | Medium | gcc: clfs/usr/lib/libitm.a is built for armv4 | Closed | |
Task Description
We find this on current toolchain:
clfs/usr/lib/libitm.a(sjlj.o)
Attribute Section: aeabi
File Attributes
Tag_CPU_arch: v4
while it should be:
Tag_CPU_arch: v5T
Building without specifying –disable-sjlj enables this support by default
From http://gcc.gnu.org/onlinedocs/libstdc++/manual/configure.html –enable-sjlj-exceptions
Forces old, set-jump/long-jump exception handling model. If at all possible, the new, frame unwinding exception handling routines should be used instead, as they significantly reduce both runtime memory usage and executable size. This option can change the library ABI.
After rebuilding the toolchain with –disable-sjlj in gcc-static/final clfs/usr/lib/libitm.a isn’t built.
|
|
58 | CRUX-ARM | kernel/cubieboard2 | Bug Report | Low | Review kernel options. | Closed | |
Task Description
Try to cut down not directly related options to this device
|
|
55 | CRUX-ARM | kernel/vexpress | Bug Report | Low | kernel/vexpress: review config and check FS | Closed | |
Task Description
We need to take a look to vexpress config and make a cleanup.
It'd interesting to add forgotten ext4 support.
|
|
22 | CRUX-ARM | ports/core-arm | Bug Report | High | Change triplet in ports collection and add bash port to ... | Closed | |
Task Description
Triplet to use in the overlay: arm-crux-linux-gnueabi
We need to change the triplet for: libgmp binutils, glibc and gcc.
We need to add bash, and force the use of this triplet to don’t break MACHTYPE (add –build=arm-unknown-linux-gnueabi too)
|
|
23 | CRUX-ARM | ports/core-armhf | Bug Report | High | Change triplet in ports collection and add bash port to ... | Closed | |
Task Description
Triplet to use in the overlay: arm-crux-linux-gnueabihf
We need to change the triplet for: libgmp binutils, glibc and gcc.
We need to add bash, and force the use of this triplet to don’t break MACHTYPE (add –build=arm-unknown-linux-gnueabihf too)
|
|
3 | CRUX-ARM | toolchain-softfp | Bug Report | Low | Create a toolchain with hardfp support. | Closed | |
Task Description
We can create a new toolchain with hardfp and thumb support.
It can be created with the same triplet used in the toolchain with a minor change (arm-cruxhf-linux-gnueabi) but the point could be to use another one: arm-crux-linux-gnueabihf
There are problems with this triplet which should be fixed before we start adopting it.
There are some checks which can be done to verify hardfp/thumb support.
readelf -e test:
The elf header should change (not implemented atm)
readelf -A test:
Tag_THUMB_ISA_use: Thumb-2
Tag_ABI_HardFP_use: SP and DP
These told us that this toolchain has thumb support and it’s built with hardfp
size test:
we can compare file’s sizes and verify that the thumb one it’s smaller.
|
|
40 | CRUX-ARM | website | Bug Report | Medium | Mailing list is broken | Closed | |
Task Description
I want to subscribe to the mailing list but https://crux-arm.nu/mailman/listinfo/crux-arm is broken.
Additionally, there are no archives since February, Is this correct? https://crux-arm.nu/pipermail/crux-arm/
|