We should investigate why? And then we could fix the build, or update the footprint on the overlay:

[...]
======⇒ ERROR: Footprint mismatch found:
MISSING -rwxr-xr-x root/root usr/lib/python2.7/lib-dynload/dbm.so
NEW -rwxr-xr-x root/root usr/lib/python2.7/lib-dynload/dbm_failed.so
======⇒ ERROR: Building ‘/usr/pkg/python#2.7.1-1.pkg.tar.gz’ failed.

We need to be sure we build python (generic native build) with shm mounted.

This script may help to discover those ports to remove:
https://crux-arm.nu/gitweb?p=devtools.git;a=blob;f=getCoreDiff.sh

Try to cut down not directly related options to this device

We need to update ruby’s .footprint to fit with current arch and ABI.
NEW drwxr-xr-x root/root usr/lib/ruby/1.9/linux-eabi/

This isn't a real task. You should close it and start opening some real tasks.

/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/libshadow.la
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -O2 -pipe -mfloat-abi=hard -MT useradd.o -MD -MP -MF .deps/useradd.Tpo -c -o useradd.o useradd.c
mv -f .deps/useradd.Tpo .deps/useradd.Po
/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/libshadow.la -lacl -lattr
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a /des/crux-arm/3.0/toolchain/clfs/usr/lib/libacl.so /usr/lib/libattr.so /des/crux-arm/3.0/toolchain/clfs/usr/lib/libattr.so -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib
/usr/lib/libattr.so: could not read symbols: File in wrong format
collect2: error: ld returned 1 exit status
make[2]: * [useradd] Error 1
make[2]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1/src'
make[1]: * [all-recursive] Error 1
make[1]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1'
make: * [all] Error 2
/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/libshadow.la
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o pwunconv pwunconv.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -I../libmisc -DLOCALEDIR=\"/usr/share/locale\" -O2 -pipe -mfloat-abi=hard -MT useradd.o -MD -MP -MF .deps/useradd.Tpo -c -o useradd.o useradd.c
mv -f .deps/useradd.Tpo .deps/useradd.Po
/bin/sh ../libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/libshadow.la -lacl -lattr
libtool: link: arm-crux-linux-gnueabihf-gcc -O2 -pipe -mfloat-abi=hard -o useradd useradd.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a /des/crux-arm/3.0/toolchain/clfs/usr/lib/libacl.so /usr/lib/libattr.so /des/crux-arm/3.0/toolchain/clfs/usr/lib/libattr.so -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib -Wl,-rpath -Wl,/des/crux-arm/3.0/toolchain/clfs/usr/lib
/usr/lib/libattr.so: could not read symbols: File in wrong format
collect2: error: ld returned 1 exit status
make[2]: * [useradd] Error 1
make[2]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1/src'
make[1]: * [all-recursive] Error 1
make[1]: Leaving directory `/des/crux-arm/3.0/crossrootfs/shadow/work/src/shadow-4.1.5.1'
make: * [all] Error 2

test2

test

Check if we can add this option directly in toolchains.
This will allow to build initrd without building core-cross' glibc.

gcc-static is unnecessarily rebuilt each time make is invoked due to an incorrect filename extension in the Makefile target definition. Patch follows:

diff –git a/Makefile b/Makefile
index 4ab3882..568739d 100644
— a/Makefile
+++ b/Makefile
@@ -173,10 +173,10 @@ binutils-distclean: binutils-clean


# GCC-STATIC
-$(WORK)/gcc-$(GCC_VERSION).tar.bz2:
+$(WORK)/gcc-$(GCC_VERSION).tar.xz:

      wget -P $(WORK) -c ftp://gcc.gnu.org/pub/gcc/releases/gcc-$(GCC_VERSION)/gcc-$(GCC_VERSION).tar.xz

-$(WORK)/gcc-$(GCC_VERSION): $(WORK)/gcc-$(GCC_VERSION).tar.bz2
+$(WORK)/gcc-$(GCC_VERSION): $(WORK)/gcc-$(GCC_VERSION).tar.xz

      tar -C $(WORK) -xf $(WORK)/gcc-$(GCC_VERSION).tar.xz
      touch $(WORK)/gcc-$(GCC_VERSION)

There are two typos in Flyspray. The first is in the page titles. Note that there is a separator missing, and duplication of “CRUX-ARM” - here is the page title I have right now:

CRUX-ARM | bugsCRUX-ARM: New Task

I suggest this be fixed to look more like Crux’s, which reads:

Flyspray:: CRUX: New Task

So we should just replace “CRUX” with “CRUX-ARM”

The second typo is when a user enters an incorrect password. When a user enters a bad password, an error appears at the bottom of the webpage that says something about the “paassword” being incorrect or something. The word “password” is spelled incorrectly.

arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -include ./config.h -I./src -DSYSCONFDIR=\""/etc"\" -DPKGLIBEXECDIR=\""/lib/udev"\" -DFIRMWARE_PATH="\"/lib/firmware/updates/\", \
"/lib/firmware/\"" -DUSB_DATABASE=\"/usr/share/usb.ids\" -DPCI_DATABASE=\"/des/crux-arm/3.0/toolchain/clfs/usr/share\" -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat
-abi=hard -MT src/udevadm-udevadm-test.o -MD -MP -MF src/.deps/udevadm-udevadm-test.Tpo -c -o src/udevadm-udevadm-test.o `test -f 'src/udevadm-test.c' || echo './'`src/udevadm-test
.c
mv -f src/.deps/udevadm-udevadm-test.Tpo src/.deps/udevadm-udevadm-test.Po
arm-crux-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -include ./config.h -I./src -DSYSCONFDIR=\""/etc"\" -DPKGLIBEXECDIR=\""/lib/udev"\" -DFIRMWARE_PATH="\"/lib/firmware/updates/\", \
"/lib/firmware/\"" -DUSB_DATABASE=\"/usr/share/usb.ids\" -DPCI_DATABASE=\"/des/crux-arm/3.0/toolchain/clfs/usr/share\" -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat
-abi=hard -MT src/udevadm-udevadm-test-builtin.o -MD -MP -MF src/.deps/udevadm-udevadm-test-builtin.Tpo -c -o src/udevadm-udevadm-test-builtin.o `test -f 'src/udevadm-test-builtin.
c' || echo './'`src/udevadm-test-builtin.c
mv -f src/.deps/udevadm-udevadm-test-builtin.Tpo src/.deps/udevadm-udevadm-test-builtin.Po
/bin/sh ./libtool –tag=CC –mode=link arm-crux-linux-gnueabihf-gcc -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat-abi=hard -Wl,–gc-sections -Wl,–as-needed -o u
devadm src/udevadm-udev-event.o src/udevadm-udev-watch.o src/udevadm-udev-node.o src/udevadm-udev-rules.o src/udevadm-udev-ctrl.o src/udevadm-udev-builtin.o src/udevadm-udev-builti
n-blkid.o src/udevadm-udev-builtin-firmware.o src/udevadm-udev-builtin-hwdb.o src/udevadm-udev-builtin-input_id.o src/udevadm-udev-builtin-kmod.o src/udevadm-udev-builtin-path_id.o
src/udevadm-udev-builtin-usb_id.o src/udevadm-udevadm.o src/udevadm-udevadm-info.o src/udevadm-udevadm-control.o src/udevadm-udevadm-monitor.o src/udevadm-udevadm-settle.o src/ude
vadm-udevadm-trigger.o src/udevadm-udevadm-test.o src/udevadm-udevadm-test-builtin.o libudev-private.la -lblkid -lkmod -lrt
libtool: link: arm-crux-linux-gnueabihf-gcc -I/usr/include/blkid -I/usr/include/uuid -O2 -pipe -mfloat-abi=hard -Wl,–gc-sections -Wl,–as-needed -o udevadm src/udevadm-udev-event.
o src/udevadm-udev-watch.o src/udevadm-udev-node.o src/udevadm-udev-rules.o src/udevadm-udev-ctrl.o src/udevadm-udev-builtin.o src/udevadm-udev-builtin-blkid.o src/udevadm-udev-bui
ltin-firmware.o src/udevadm-udev-builtin-hwdb.o src/udevadm-udev-builtin-input_id.o src/udevadm-udev-builtin-kmod.o src/udevadm-udev-builtin-path_id.o src/udevadm-udev-builtin-usb_
id.o src/udevadm-udevadm.o src/udevadm-udevadm-info.o src/udevadm-udevadm-control.o src/udevadm-udevadm-monitor.o src/udevadm-udevadm-settle.o src/udevadm-udevadm-trigger.o src/ude
vadm-udevadm-test.o src/udevadm-udevadm-test-builtin.o ./.libs/libudev-private.a /des/crux-arm/3.0/toolchain/clfs/usr/lib/libblkid.so /usr/lib/libuuid.so /des/crux-arm/3.0/toolcha
in/clfs/usr/lib/libkmod.so -lrt -Wl,-rpath -Wl,/usr/lib -Wl,-rpath -Wl,/usr/lib
/usr/lib/libuuid.so: could not read symbols: File in wrong format
collect2: error: ld returned 1 exit status
make[2]: * [udevadm] Error 1 make[1]: * [all-recursive] Error 1
make: *** [all] Error 2

For example, on efika’s there is a problems booting kernel 2.6.31.14.27 and current udev 175

Lot of errors (udevd[XXX]: unable to receive ctrl connection: Function not implemented) spammed and a wait time to finish booting around 2 minutes.

Debian has a patch for kernel which could be good to take a look and decide if could be interesting to apply it to current CRUX-ARM kernel for efikamx device.

Link to patch propossal and explanation:
http://lists.debian.org/debian-kernel/2011/11/msg00241.html

Hello everyone,

the URL for port opt/subversion is invalid: http://www.apache.org/dist/subversion/subversion-1.7.7.tar.bz2

The only version that is available at that site is 1.7.8: http://www.apache.org/dist/subversion/subversion-1.7.8.tar.bz2

I tried compiling version 1.7.8 and had no problems.

The new md5sum is:

# cat /usr/ports/opt/subversion/.md5sum
454b9f398415c3504435bf8c3f6ed127 subversion-1.7.8.tar.bz2

Best regards,
Christian.

======⇒ ERROR: Footprint mismatch found:
MISSING lrwxrwxrwx root/root usr/bin/i386 → setarch
MISSING -rw-r–r– root/root usr/man/man8/i386.8.gz

We need an overlay for this port to fix this arch mistmatch.

======⇒ ERROR: Footprint mismatch found:
MISSING lrwxrwxrwx root/root usr/bin/i386 → setarch
MISSING -rw-r–r– root/root usr/man/man8/i386.8.gz

We need an overlay for this port to fix this arch mistmatch.

Xorg input devices would not work for me using core-arm/udev (version 167) on a cubox platform.

I upgraded to version 182 and the input devices worked fine. I had to patch udev to replace calls to accept4() with accept(). Pkgfile (based on core/udev) and patch appear below:

######## Pkgfile ############
# Description: Userspace device management daemon
# URL: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html # Maintainer: CRUX System Team, core-ports at crux dot nu
# Depends on: kmod

name=udev version=182
release=1
source=(ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/$name-$version.tar.x
z \

      pre-accept4-kernel.patch 81-crux.rules start_udev)

build() {

  cd udev-$version

  patch -p1 < $SRC/pre-accept4-kernel.patch
  ./configure --prefix=/usr \
              --sbindir=/sbin --bindir=/sbin \
              --sysconfdir=/etc \
              --with-rootlibdir=/lib \
              --with-rootprefix= \
              --libexecdir=/lib \
              --mandir=/usr/man \
              --disable-introspection \
              --disable-gudev \
              --disable-udev_acl \                                                                                                                                                                                                                         --disable-keymap \
              --enable-static \
              --enable-rule_generator                                                                                                                                                                                                      
  make
  make install DESTDIR=$PKG

  mkdir -p $PKG/lib/{firmware,udev/devices/{pts,shm}}
  mkdir -p $PKG/{lib,sbin,run}
  
  # Symlink to udevd
  ln -s ../lib/udev/udevd $PKG/sbin/udevd

  # Add CRUX items
  install -m 0755 $SRC/start_udev $PKG/sbin
  install -m 0644 $SRC/81-crux.rules $PKG/lib/udev/rules.d
                                                                                                                                                                                                                                               # Remove junk
  rm -r $PKG/usr/share/{gtk-,}doc

}

######### pre-accept4-kernel.patch ###########
diff -urN a/src/udev-ctrl.c b/src/udev-ctrl.c
— a/src/udev-ctrl.c 2011-10-09 17:10:32.000000000 -0600
+++ b/src/udev-ctrl.c 2011-10-25 15:11:09.000000000 -0600
@@ -15,6 +15,7 @@
#include <stddef.h>
#include <string.h>
#include <unistd.h>
+#include <fcntl.h>
#include <sys/types.h>
#include <sys/poll.h>
#include <sys/socket.h> @@ -182,6 +183,7 @@

       struct ucred ucred;
       socklen_t slen;
       const int on = 1;

+ int flgs;

       conn = calloc(1, sizeof(struct udev_ctrl_connection));
       if (conn == NULL)

@@ -189,13 +191,19 @@

       conn->refcount = 1;
       conn->uctrl = uctrl;

- conn→sock = accept4(uctrl→sock, NULL, NULL, SOCK_CLOEXEC|SOCK_NONBLOCK);
+ conn→sock = accept4(uctrl→sock, NULL, NULL, SOCK_CLOEXEC|SOCK_NONBLOCK);
+ conn→sock = accept(uctrl→sock, NULL, NULL);
if (conn→sock < 0) {
if (errno != EINTR)
err(uctrl→udev, "unable to receive ctrl connection: %m\n");
goto err;
}
+ Since we don't have accept4
+ flgs = fcntl(conn→sock, F_GETFL, NULL); + if(flgs >= 0) fcntl(conn→sock, F_SETFL, flgs | O_NONBLOCK);
+ fcntl(conn→sock, F_SETFD, FD_CLOEXEC); +

       /* check peer credential of connection */                                                                                                                                                                                                    slen = sizeof(ucred);
       if (getsockopt(conn->sock, SOL_SOCKET, SO_PEERCRED, &ucred, &slen) < 0) {

It’s nice to be able to gzip modules to save space. Can –with-zlib please be added to kmod? I have it working well with my setup but it would be nice if this was mainlined.

Thanks!

MUhRIH <a href="http://hckguwwxxtal.com/">hckguwwxxtal</a>, [url=http://kvdowxxjwqhs.com/]kvdowxxjwqhs[/url], [link=http://kbsgkdubbjvq.com/]kbsgkdubbjvq[/link], http://bjluubgmdbxt.com/

The script is useful to obtain ports from core-arm, opt-arm, xorg-arm overlays which are updated in upstream core, opt and xorg.
It would be fine to check ports for 'per device' overlays since gcc, pkgutils, ports and prt-get are ports that we overlayed for each device. In this case, the script should check each port against the upstream repo where the port is located.
For example,

case $repo in

efikamx|cubieboard|cubieboard2|raspberrypi)
# foreach port in repo
for port in $PORTS; do
  # get upstream repo where the port is located
  upstream_repo=""
  for up_repo in core opt xorg; do
    upstream_repo="$(basename $(dirname $(prt-get --no-std-config --config-prepend="prtdir /usr/ports/$up_repo" path $port 2>/dev/null) 2>/dev/null) 2>/dev/null)"
  done
  [ "$upstream_repo" == "" ] && exit
  # continue
  ...

by default, uboot on efikamx is configured to load boot.scr files from the topdir of mmc and ide devices, but it would be useful to have a similar behaviour than upstream and place bootloader stuff + kernel images, etc. in /boot directory

this is the default boot command for uboot on efikamx:

bootcmd=for device in "mmc ide"; do if strcmp ${device} == mmc; then; mmcinit;
setenv units "0 1"; else; setenv units "0"; fi; for interface in ${units}; do
if strcmp ${device} == mmc; then mmcprobe ${interface}; else; ide reset; fi;
for fs in "ext2 fat"; do setenv loadcmd "${fs}load ${device} 0:1"; if
${loadcmd} ${scriptaddr} boot.scr; then; if imi ${scriptaddr}; then; autoscr
${scriptaddr}; fi; fi; done; done; done;

maybe it will work by replacing boot.scr by /boot/boot.scr?

Since we are adding all needed files to get dns resolved, probably we can think about this and remove it or fix it adding libc and ld-linux-armhf files.

# ping localhost
ping: bad address

Final initramfs size will grow 1M. Removing libnss and libresolv files won't make it decrease too much. Could this be interesting for a debugging initramfs and not for a media installer?

Small patch to add those files:
diff –git a/Makefile b/Makefile
index 5338441..7d88f5f 100644
— a/Makefile
+++ b/Makefile
@@ -152,6 +152,7 @@ $(WORK)/initramfs.cpio: check-root busybox e2fsprogs dialog $(WORK)/mnt gen_init

      done
      install -v -m 0755 $(WORK)/dialog-$(DIALOG_VERSION)/_install/usr/bin/dialog $(WORK)/mnt/usr/bin
      cp -dRv $(CLFS)/lib/libnss_{files*,dns*} $(CLFS)/lib/libresolv* $(WORK)/mnt/lib

+ cp -dRv $(CLFS)/lib/{ld-linux-armhf.so.3,libc-2.16.so,libc.so.6} $(WORK)/mnt/lib

      install -d  $(WORK)/mnt/usr/share/terminfo
      cp -dRv $(CLFS)/usr/share/terminfo/v $(WORK)/mnt/usr/share/terminfo
      install -v -m 0644 $(TOPDIR)/filesystem/{fstab,inittab,profile,protocols,*.conf} $(WORK)/mnt/etc

Building toolchain 2.6 in a CRUX 2.7 host (using make 3.82) we can find a problem in glibc build:
*** mixed implicit and normal rules. Stop.

We can try to add a patch and fix this problem to build CRUX-ARM 2.6 (eabi/noeabi) in a CRUX 2.7 host (with make 3.82).
This should be tested in a 2.6 host and verify it builds right too. I’ll try to provide this last check while waiting for comments or opinions in this bug.

glibc-2.10.1-make382.patch
— glibc-2.10.1_orig/manual/Makefile 2012-02-08 08:05:11.777529411 +0000
+++ glibc-2.10.1/manual/Makefile 2012-02-08 08:06:46.189531779 +0000
@@ -232,7 +232,9 @@
.PHONY: stubs
stubs: $(objpfx)stubs
endif
-$(objpfx)stubs ../po/manual.pot $(objpfx)stamp%:
+$(objpfx)stubs ../po/manual.pot:
+ touch $@
+$(objpfx)stamp%:

      $(make-target-directory)
      touch $@

Makefile
diff –git a/Makefile b/Makefile
index aea2b53..5af5d60 100644
— a/Makefile
+++ b/Makefile
@@ -174,9 +174,9 @@ $(WORK)/glibc-$(GLIBC_VERSION).tar.bz2:
$(WORK)/glibc-ports-$(GLIBC_VERSION).tar.bz2:

      wget -P $(WORK) -c ftp://ftp.gnu.org/gnu/glibc/glibc-ports-$(GLIBC_VERSION).tar.bz2

$(WORK)/glibc-$(GLIBC_VERSION): $(WORK)/glibc-$(GLIBC_VERSION).tar.bz2 $(WORK)/glibc-ports-$(GLIBC_VERSION).tar.bz2
-

      tar -C $(WORK) -xvjf $(WORK)/glibc-$(GLIBC_VERSION).tar.bz2
      cd $(WORK)/glibc-$(GLIBC_VERSION) && \

+ patch -p1 -i $(WORK)/glibc-$(GLIBC_VERSION)-make382.patch && \

              tar xvjf $(WORK)/glibc-ports-$(GLIBC_VERSION).tar.bz2 && \
              mv glibc-ports-$(GLIBC_VERSION) ports && \
              sed -e 's/-lgcc_eh//g' -i Makeconfig

Current error trying to build firefox on the cubieboard:

c++ -o BufferUnrotate.o -c -fvisibility=hidden -DMOZ_GLUE_IN_PROGRAM -DMOZILLA_INTERNAL_API -DIMPL_LIBXUL -DSTATIC_EXPORTABLE_JS_API -DNO_NSPR
_10_SUPPORT -DOS_POSIX=1 -DOS_LINUX=1 -I../../ipc/chromium/src -I../../ipc/glue -I../../ipc/ipdl/_ipdlheaders -I../../content/events/src -I/fr
ameworks/base/include/media/stagefright -I/frameworks/base/include/media/stagefright/openmax -I/frameworks/av/include/media/stagefright -I/frame
works/native/include/media/openmax -I../../gfx/layers -I. -I../../dist/include -I/usr/include/nspr -I/usr/include/nss -fPIC -DMOZILLA_C
LIENT -include ../../mozilla-config.h -MD -MP -MF .deps/BufferUnrotate.o.pp -Wall -Wpointer-arith -Woverloaded-virtual -Werror=return-type -Wty
pe-limits -Wempty-body -Wsign-compare -Wno-invalid-offsetof -O2 -pipe -mfloat-abi=hard -mfpu=neon -mcpu=cortex-a8 -mtune=cortex-a8 -fno-exceptio
ns -fno-strict-aliasing -fno-rtti -ffunction-sections -fdata-sections -fno-exceptions -fno-math-errno -std=gnu++0x -pthread -pipe -DNDEBUG -DTR
IMMED -g -O2 -pipe -mfloat-abi=hard -mfpu=neon -mcpu=cortex-a8 -mtune=cortex-a8 -fomit-frame-pointer -I/usr/include/cairo -I/usr/include/glib-2.
0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/cairo -I/usr/include/glib
-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/pixman-1 -I../../widg
et/gtk2/compat -pthread -I/usr/include/gtk-2.0 -I/usr/include/gtk-unix-print-2.0 -I/usr/include/gtk-2.0 -I/usr/include/atk-1.0 -I/usr/include/pa
ngo-1.0 -I/usr/include/harfbuzz -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/p
ixman-1 -I/usr/include/freetype2 -I/usr/include/libpng15 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng15 -I/usr/include/glib-2.0 -I/usr/li
b/glib-2.0/include /mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp: In function 'void BufferUnrotate(uint8_t*, int, int, int, int, int)':
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:34:60: error: 'memcpy' was not declared in this scope
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:35:86: error: 'memmove' was not declared in this scope
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:57:77: error: 'memcpy' was not declared in this scope
/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers/BufferUnrotate.cpp:58:90: error: 'memmove' was not declared in this scope
make[3]: * [BufferUnrotate.o] Error 1
make[3]: Leaving directory `/mnt/work_cb1/firefox/src/mozilla-release/gfx/layers'
make[2]: * [compile] Error 2
make[2]: Leaving directory `/mnt/work_cb1/firefox/src/mozilla-release/gfx'
make[1]: * [compile] Error 2
make[1]: Leaving directory `/mnt/work_cb1/firefox/src/mozilla-release'
make: * [default] Error 2

There is a patch to solve it. Currently testing locally.

— a/mozilla-release/gfx/layers/BufferUnrotate.cpp
+++ b/mozilla-release/gfx/layers/BufferUnrotate.cpp
@@ -8,6 +8,7 @@
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
+#include <string.h> /* memcpy() memmove() */

void BufferUnrotate(uint8_t* aBuffer, int aByteWidth, int aHeight,

                   int aByteStride, int aXBoundary, int aYBoundary)